Pulse input sensor for HOBOnet network RXW-UCC-868

The RXW-UCC-868 is a pulse input sensor wireless connection to sensors with pulse output.
This sensor is compatible with electronic switch closures, such as FET or open collector outputs, or CMOS level logic signals.
Wireless sensors HOBOnet communicate the data directly to HOBO RX3000 or HOBO MicroRX, or transmit the data via other sensors wireless towards central station.
They are preconfigured and ready for deployment, and data are accessible via HOBOlink, the innovative cloud software platform of'Onset.

Important:

A complete system requires at least one remote monitoring station HOBO RX3000, a wireless manager HOBOnet and one wireless sensor HOBOnet , OR microRX HOBO station (which has an integrated HOBOnet wireless manager) and a wireless sensor HOBOnet .
Des wireless repeaters HOBOnet can be added for extend the scope.

Technical characteristics of the sensor:

- Maximum input frequency 120 Hz (120 pulses per second)
- Electronic semiconductor switch closure or CMOS digital output
- Wireless features
- Wireless mesh self-healing technology 866.5 MHz
- Wireless range from 450 to 600 metres (1,500 to 2,000 feet) and up to five jumps
- Up to 50 wireless sensors or 336 data channels per HOBO RX station
- Just press a button to join the HOBOnet wireless network
- Onboard memory to avoid data loss
- Powered by rechargeable AA batteries and integrated solar panel

Complementary Features:

- for electronic switches
- Measurement input frequency: 120 Hz (120 pulses per second)
- Measuring range: 0-65 533 pulses per recording interval
- Resolution: 1 pulse
- Locking time: 45μs ±10%
: Recommended input type: Electronic semiconductor switch closure or CMOS digital output (e.g. FET, opto-FET or open collector)
- Preferred switching state: Active bass input
- Edge detection: down front, Schmitt Trigger buffer (logical levels: low = 2.7 V)
- Minimum pulse width: 1 millisecond
- Input/output impedance: 100K?
- Open-circuit input voltage: 3.3 V
- Maximum input voltage: 3.6 V
- User login: 24 AWG threads, 2 threads: white(+), black(-)
- Operating temperature range:
25° to 60°C (-13° to 140°F) with rechargeable batteries
40 to 70°C (-40 to 158°F) with lithium batteries
- Radio power: 12.6 mW (+11 dBm) not adjustable
- Transmission range:
Reliable connection to a 457.2 m (1,500 ft) sight line at a height of 1.8 m (6 ft)
Reliable connection to a 609.6 m (2 000 ft) sight line at a height of 3 m (10 ft)
- IEEE Wireless Data Standard 802.15.4
- Radio operating frequencies RXW-UCC-868 and RXW-UCD-868: 866.5 MHz
- Modulation employed: OQPSK (decalation of modulation by quadrature phase displacement)
- Data flow rate up to 250 kbps, not adjustable
- Service cycle: - Maximum number of points: up to 50 wireless sensors or 336 data channels per HOBO RX station
- Log rate: 1 minute at 6 p.m
- Number of channels: 2
- Type of battery / power source:
2 rechargeable NiMH batteries AA 1.2 V powered by an integrated solar panel
or
2 AA 1.5 V lithium batteries for operating conditions of -40 to 70 °C (-40 to 158 °F)
- Battery life:
With NiMH batteries : Typically 3 to 5 years when used in a temperature range of -20° to 40°C (-4°F to 104°F) and positioned towards the sun (see Deployment and mounting), operation outside this range will reduce battery life
With lithium batteries : 1 year, typical use
- Memory : 16 MB
- Dimensions:
Cable length : 6.5 m (21.3 ft)
Length : 16,2 x 8,59 x 4,14 cm (6,38 x 3,38 x 1,63 inches)
- Weight:
Cable cable : 250 g (9 oz)
Cable cable : 223 g (7.87 oz)
Materials Mote : PPCBT, silicone rubber seal
Environmental Assessment Mote: IP67, NEMA 6

Contents of the box:

- HOBOnet pulse input
- Electronic switching sensor
- Zip hooks and screws for mounting